SMT Pick & Place
 Model 1500S 1500SN 1500 Dual Cool 1500N Dual Cool
 Mesh Belt Conveyor
 Conveyor Height From Floor 35"+3/-2"
(89cm+7.5/-5cm)
35"+3/-2"
(89cm+7.5/-5cm)
35"+3/-2"
(89cm+7.5/-5cm)
35"+3/-2"
(89cm+7.5/-5cm)
 Maximum PCB Width 22"(56cm) 10"(25cm) 15"(38cm)
18"(46cm) 21"(21cm)
22"(56cm) 10"(25cm) 15"(38cm)
18"(46cm) 21"(21cm)
 Conveyor Length On-Load 18"(46cm) 3"(7.6cm) 18"(46cm) 3"(7.6cm)
 Conveyor Length Off-Load 18"(46cm) 3"(7.6cm) 18"(46cm) 3"(7.6cm)
 Heated Tunnel Length
72"(183cm) 68"(172cm) 64"(163cm) 54"(137cm)
 Conveyor Direction L to R S S S S
 Conveyor Direction R to L O O O O
 Maximum Conveyor Speed
76"(193cm)/min 76"(193cm)/min 76"(193cm)/min 76"(193cm)/min
 Conveyor Speed Control Closed Loop Closed Loop Closed Loop Closed Loop
 Process Clearance Above Mesh Belt 2.3"(5.8cm) 2.3"(5.8cm) 2.3"(5.8cm) 2.3"(5.8cm)
 Edge Hold Conveyor
 Power Width Adjustment S S S S
 Computer Width Adjustment O O O O
 Clearance Above Conveyor Pins 1.2"(3cm) 1.2"(3cm) 1.2"(3cm) 1.2"(3cm)
 Clearance Below Conveyor Pins 1.2"(3cm) 1.2"(3cm) 1.2"(3cm) 1.2"(3cm)
 Length of Board Support Pin 0.15"(3.8cm) 0.15"(3.8cm) 0.15"(3.8cm) 0.15"(3.8cm)
 Minimum/Maximum Board Width 2.21"(5-53cm) 2.21"(5-53cm) 2.21"(5-53cm) 2.21"(5-53cm)
 Forced Convection Zones
 Top 5 5 5 5
 Bottom 5 5 5 5
 Heater Type Instant response open coil Instant response open coil Instant response open coil Instant response open coil
 Warns-Up Time From Cold Start 15 minutes 15 minutes 15 minutes 15 minutes
 Profile Change Time < 5 Minutes < 5 Minutes < 5 Minutes < 5 Minutes
 Temperature Control
 Accuracy of Temperature ± 1°C ± 1°C ± 1°C ± 1°C
 Cross-Belt Temperature Tolerance ± 3°C ± 3°C ± 3°C ± 3°C
 Heater Wattage Per Zone 6000w 6000w 6000w 6000w
 Temperature Range Standard 25-300°C 25-300°C 25-300°C 25-300°C
 High Temperature Up To 350C O O O O
 UV Cure O - O -
 Cooling System
 Number of Internal Cooling Zones 1 1 2 2
 External Cooling Zone 0 0 0 0
 Water Cooling - 0 - 0
 Electric Supply
 Power Input (3 phase) Standard 208 or 240 volts 208 or 240 volts 208 or 240 volts 208 or 240 volts
 Warm Up Current 100 amps @ 208v 100 amps @ 208v 100 amps @ 208v 100 amps @ 208v
 Run Current 45 amps @ 208v 45 amps @ 208v 45 amps @ 208v 45 amps @ 208v
 Optional Inputs Available 380/400/415/
440/480v AC
380/400/415/
440/480v AC
380/400/415/
440/480v AC
380/400/415/
440/480v AC
 Frequency 50/60/ Hz 50/60/ Hz 50/60/ Hz 50/60/ Hz
 Sequential Zone Turn On S S S S
 Dimensions
 Overall Length 134"(340cm) 134"(340cm) 134"(340cm) 134"(340cm)
 Overall Width 36"(91cm) 36"(91cm) 36"(91cm) 36"(91cm)
 Overall Height 54"(137cm) 54"(137cm) 54"(137cm) 54"(137cm)
 Net Weight 2000 lbs. (900kg) 2000 lbs. (900kg) 2000 lbs. (900kg) 2000 lbs. (900kg)
 Shipping Weight 2500 lbs. (1127kg) 2500 lbs. (1127kg) 2500 lbs. (1127kg) 2500 lbs. (1127kg)
 Inert Atmosphere
 Minimum PPM 02 - 10-25 PPM - 10-25 PPM
 Flexible Entrance and Exit Doors - S - S
 N2/Air Valve - O - O
 02 Monitoring System - O - O
 N2 Standby System - O - O
 Sample Ports in Reflow - O - O
 Typical N2 Consumption @ 25 PPM - < 1000 SCFH - < 1000 SCFH

S = Standard

O = Optional

Used PBC electronic assembly machinery, Developed and Maintained by Petlock Inc. Est. 1978